Skip to content
RGLAX PHARMARglax Coat

Annexure II

Products

Ready-mix tablet coating material, polymers and resins, listed by product code with the application each grade is formulated for. Open any code for full details.

Download the product list (PDF)

Film Coating System

Aqueous and non-aqueous film coats, formulated to your application and regulatory requirement.

About film coating systems

Enteric Coating System

Delayed release polymers on methacrylic, phthalate and CAP bases for aqueous or organic processing.

About enteric coating systems

Moisture Barrier Coating

HPMC and PVA based immediate release systems that protect against light, moisture and environmental gases.

About moisture barrier systems

Choosing a grade

How do I choose between the enteric grades?

By the active and by the polymer your filing names. ECM-RP347 is non-aqueous methacrylic for the Pantoprazole group, ECM-RP348 is the aqueous methacrylic route for Diclofenac and Serratiopeptidase, EC714 covers the same two actives on a CAP base, ECPT5 is phthalate base for Duloxetine, and ECMS is a second bond for Mesalamine.

Do all grades run on the same parameters?

There are two bands. Film, seal, sugar, metallic, moisture barrier and sustained release grades run the film coating band, which is 35 to 40 degrees at the bed for aqueous and 30 to 35 for non-aqueous. Every enteric grade runs cooler, at 30 to 32 degrees with a 45 to 50 degree inlet, because a hot bed costs you gastro resistance.

What if the grade we need is not listed here?

It can be developed against your specification. Send the core composition, the shade reference and the coating equipment details, and we formulate against them rather than fitting you to an existing code.

Which grades are blended rather than coated?

RT-114, RT314 and HR100 go in at the blending stage rather than through a coater. The taste mask goes into the suspension formulation, the dissolution enhancer corrects disintegration time and dissolution, and the hygroscopic adsorbent is added ahead of compression.

Grades not listed here can be developed against your specification. Send us your requirement with the core composition, shade reference and coating equipment details.